Technical Documents

telemetry record and replay system

Telemetry Record & Replay System

Digilogic DLRR-70XXX model is capable of recording live telemetry data at various stages for a period of 2 to 4 hours without user intervention. The recording media uses the latest mSATA solid state drive technology. Each SSD connects to the controller chip using a 6 Gb/s SATA interface. 

Telemetry Record & Replay System​








    Spectrum Monitoring Receiver

    Spectrum Monitoring Analyzer is a PXIe based system for detection, analysis & demodulation of digital& analog RF/IF signals. The software designed is capable of powerful signal analysis & signal processing. This has been developed in LabVIEW environment & implemented on Virtex-5 FPGA . If connected with NI PXIe based monitoring receivers with internal digital down converters, up to six signals can be processed in parallel.

    Spectrum Monitoring Receiver








      Rugged PXIe Systems

      DSPL MILStandard PXI(e) Chassis combines the benefits of PXI(e) platform with ruggedized design. With the DSPL MIL Standard PXI(e) Chassis, you are no longer tied to the lab with your PXI(e) applications. 

      Rugged PXIe Systems​








        RCS Acquisition & Analysis Suite

        The RCS is a vital parameter for the design of modern aircrafts, missiles, helicopters, ground military vehicles, launchers, airport buildings and other important strategic installations. It is difficult to theoretically estimate RCS of complex targets as it is impossible to include all practical phenomena into consideration.

        RCS Acquisition & Analysis Suite








          Radar Waveform Generator

          The RCS is a vital parameter for the design of modern aircrafts, missiles, helicopters, ground military vehicles, launchers, airport buildings and other important strategic installations. It is difficult to theoretically estimate RCS of complex targets as it is impossible to include all practical phenomena into consideration.

          Radar Waveform Generator








            Radar Target Echo Simulator

            Development of today’s sophisticated Radar Systems require advanced simulation and measurement techniques in order to evaluate performance under different operating modes and to ensure system’s specifications are met and fully characterized. To achieve this, more realistic testing with RF signals representing the field environment conditions are required. Hence, radar designers are looking for a more advanced, flexible and real-time radar simulation system through which they can simulate Radar Echo Characteristics to simulate the radar scenario replicating the required field conditions.

            Radar Target Echo Simulator








              GNSS & GPS Simulator

              An Unique, Integrated and Modular Multi-Constellation GNSS Signal Simulator.

              GNSS & GPS Simulator








                FDM Demultiplexer

                The efficient algorithm and high-performance FPGA are combined to build the FDM Demultiplexer with 24 channel AM-SSB demodulator. The system is very compact with only three modules, a NI-Embedded controller, FlexRIO and an adapter module.

                FDM Demultiplexer








                  Communication Tester

                  Digilogic’s Communication Tester is a modular, COTS, multifunction, programmable, benchtop Automated Test System (ATS) that supports a wide range of real-time RF and microwave stimulus, Test and Measurement (T&M) applications.

                  Communication Tester








                    Cable Harness Tester

                    We offer a full turnkey solution to all harness testing and cable testing requirements, not only the supply of Test Hardware but the development of Test Software and Hardware Interfaces customized to our client’s application.

                    Digilogic Cable Harness Testers are fast, accurate and easy to use. It is being designed using the latest available technologies to provide a flexible and adaptable product line that meets the changing needs of wire harness manufacturers.

                    Cable Harness Tester








                      Antenna Measurement Suite

                      DIGILOGIC Antenna Measurement & Analysis Suite is our powerful software tool that thoroughly characterizes any antenna such as conventional / monopulse / polarized to ensure that the antenna meets its specifications. Typical parameters of antenna are gain, radiation pattern, beamwidth, side Lobe Level, null depth, cross-over points and crosstalk.
                      Antenna Measurement Suite








                        CW Measurement Test

                        TDAS Software Package

                        TDAS has a user-friendly GUI designed in dark mode for reducing strain on eye and to allow screen to adjust to prevailing light condition. It measures, records, evaluates and conducts all types of thermocouples and RTDs with main menu such as Account Login, Channel Configuration, Acquisition and Offline Analysis. The in-detail sub-menu meets all the requirements of customer.

                        TDAS Software Package








                          Software defined radio

                          Software Defined Radio - DSSS CDMA

                          The Digilogic Direct Sequence Spread Spectrum Radio provides highly reliable communications with high resistance to interference and interception. 

                          Software Defined Radio - DSSS CDMA








                            RF Up/Down Converter

                            RF Up Down Converter for VST

                            The Digilogic RF UP/Down Converter for VST has been designed with latest cutting edge technology which is compatible with National Instruments hardwares / products.

                            RF Up Down Converter for VST








                              radome measurement graph

                              Radome Measurement & Analysis Suite

                              Digilogic Radome Measurement & Analysis Suite is a powerful software tool that thoroughly characterizes any Radome to confirm if the Radome meets its specifications. Typical parameters of Radome measured are transmission loss, boresight error and sidelobe degradation.
                              Radome Measurement & Analysis Suite








                                RTES

                                Radar Test & Evaluation System

                                Radars are designed to detect aircraft, ships and vehicles at long ranges and also multiple targets. Radar allows the operators to distinguish between friendly and hostile aircraft hundreds of miles away.

                                Radar Test & Evaluation System








                                  IF Record and Replay System_Digilogic Systems

                                  IF Record & Replay System

                                  The Two Channels IF Record and Replay System is a PXIe based system with software capable of finding, channelizing and recording the signals of interest. Supports automated detection and recording of up to 32 different signals (16 signals per channel) with selectable bandwidths. Replay of 2 channels simultaneously is also supported.

                                  IF Record & Replay System








                                    frequency response analyser

                                    Frequency Response Analyzer

                                    By frequency response, we mean the response characteristics of the system when subject to sinusoidal inputs. The input frequency is varied, and the output characteristics are computed or represented as a function of the frequency. Frequency response analysis provides useful insights into stability and performance characteristics of the control system.

                                    Frequency Response Analyzer








                                      Data acquisition system

                                      Data Acquisition Systems

                                      By frequency response, we mean the response characteristics of the system when subject to sinusoidal inputs. The input frequency is varied, and the output characteristics are computed or represented as a function of the frequency. 

                                      Data Acquisition Systems








                                        checkout system

                                        Checkout Systems

                                        In recent years, DSPL has taken up the front seat amongst system integrators around the world in realizing valuable Checkout Systems for Defense & Aerospace. 

                                        Checkout Systems








                                          ATE

                                          Automated Test Equipments

                                          Whatever your automated test system requirements, we will partner with you to design, validate and build the solution you require. Matching the right software and modular hardware is key to building successful test systems. Automated Test Equipment (ATE) from DSPL are based on COTS technology with customization as per test requirements.
                                          Automated Test Equipments








                                            Actuator Test System

                                            Actuator Test System

                                            The Actuator Test System is an Automated Testing of Servo Controls & Actuators. Here, we test the systems using Frequency Response Analyzers, Universal Waveform Generators, Data Acquisition System (PXI), Servo Control Unit (SCU), and Load cell test setup.

                                            Actuator Test System








                                              Missile Checkout System

                                              Missile Checkout System

                                              A Checkout system is a System that is utilized to provide resources to conduct a test on various Sub-systems individually as well as integrated as One Module.
                                              Missile Checkout System








                                                Hydrophone Calibration System_Digilogic Systems

                                                Hydrophone Calibration System

                                                The purpose of a Hydrophone Calibration System is to primarily calibrate and compare the Test Hydrophone(s) with the Standard Projector & Standard Receiver Hydrophones by employing Reciprocity, Comparison and Directivity principles. Hydrophone Calibration System employs special techniques taking into consideration various requirements of calibration principles, limitations of water medium and frequency range of operation (limited due to the dimensions of water tank of 8*8*8 m).

                                                Hydrophone Calibration System








                                                  CHECKOUT SYSTEM- SATELLITE PAYLOAD

                                                  Checkout System For Satellite Payloads

                                                  A central requirement for mission success is thorough validation of all mission systems and subsystems. Test systems are widely used in the space industry to validate the interfaces and functionality of satellites, satellite platforms, satellite payloads, satellite instruments 

                                                  Checkout System For Satellite Payloads








                                                    ADS-B receiver from Digilogic Systems

                                                    ADS-B Receiver

                                                    A central requirement for mission success is thorough validation of all mission systems and subsystems. Test systems are widely used in the space industry to validate the interfaces and functionality of satellites, satellite platforms, satellite payloads, satellite instruments 

                                                    ADS-B Receiver








                                                      TDOA Based LF System_Digilogic Systems

                                                      TDOA Based LF System

                                                      TDOA based LF system is a multiple sensors distributed network topology covering within 40kms range of a centralized data aggregator and are capable of generating a Pulse Description Words (PDW) which contains information about the EM wave.

                                                      TDOA Based LF System